手機 : 15866677695
Handboards (handmade, first board) are also commonly referred to as product samples, which are common in sedans and medical professions. When a planner plans a new product, in order to verify its feasibility and appearance fit. Therefore, it is necessary to produce small batches of samples to verify the appearance and structural functionality, in order to adapt to the shopping mall tests conducted for new product upgrades.
The appearance prototype model is based on the premise that a mold has not yet been opened, and according to the planning requirements, a set or several sets of prototype parts mainly based on appearance are first made to check whether they meet the aesthetic and structural requirements of the product.
1、 Before the production of the prototype model, it is necessary to plan the manufacturing process, materials, accuracy, scale, and surface treatment of the prototype. Reasonably make full use of various materials, including human resources, prototype molding equipment, drawings, project requirements, and various post-processing materials. Collect the materials for the appearance prototype project in good condition. Prepare a product processing list.
2、 Develop a useful processing plan that prioritizes quality in cost control to meet the needs of customers, based on the fundamental appearance requirements of the prototype.
3、 The quality management personnel of the prototype must ensure that each operation process is well controlled, and once problems are found, they should be dealt with immediately to avoid affecting subsequent processes and wasting costs.
4、 Establish a database of appearance prototype projects to ensure consistency and completeness of prototype drawings, prototype manufacturing processes, parts, and the entire physical model. Strictly implement the relevant manual manufacturing process regulations.
5、 Timely follow up and update the progress of the appearance prototype project, and complete the collection of process data, drawings, documents, and other materials. In the process of prototype manufacturing, there can be evidence to support better communication between the product planning department and the product engineering department through a consistent database for material exchange. Effectively update planning documents, demand changes, and other materials in a timely manner.
6、 The appearance of the prototype needs to be carefully processed in the later stage. Strictly control the quality, including polishing, surface strengthening treatment, coloring and painting.
Thank you for reading. The source of this article is Jinan Shouban. For more information and questions, please click: http://www.sixpacksforsoldiers.com We will continue to work hard to provide you with services. Thank you for your support!